[PATCH] USB: serial: cp210x: Add Silicon Labs 358x VID and PID.

Discussion:

Nathaniel Ting

2014-10-02 21:38:17 UTC

From: Nathaniel Ting <***@silabs.com>

Enable Silicon Labs Ember VID chips to enumerate with the cp210x usb serial
driver. EM358x devices operating with the Ember Z-Net 5.1.2 stack may now
connect to host PCs over a USB serial link.

Signed-off-by: Nathaniel Ting <***@silabs.com>
---
drivers/usb/serial/cp210x.c | 1 +
1 file changed, 1 insertion(+)

diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c
index e4bb622..ce81fa8 100644
--- a/drivers/usb/serial/cp210x.c
+++ b/drivers/usb/serial/cp210x.c
@@ -154,6 +154,7 @@ static const struct usb_device_id id_table[] = {
{ USB_DEVICE(0x18EF, 0xE00F) }, /* ELV USB-I2C-Interface */
{ USB_DEVICE(0x1ADB, 0x0001) }, /* Schweitzer Engineering C662 Cable */
{ USB_DEVICE(0x1B1C, 0x1C00) }, /* Corsair USB Dongle */
+ { USB_DEVICE(0x1BA4, 0x0002) }, /* Silicon Labs 358x factory default */
{ USB_DEVICE(0x1BE3, 0x07A6) }, /* WAGO 750-923 USB Service Cable */
{ USB_DEVICE(0x1E29, 0x0102) }, /* Festo CPX-USB */
{ USB_DEVICE(0x1E29, 0x0501) }, /* Festo CMSP */
-- 1.9.1

Greg KH

2014-10-02 22:20:37 UTC

Permalink

Post by Nathaniel Ting
Enable Silicon Labs Ember VID chips to enumerate with the cp210x usb serial
driver. EM358x devices operating with the Ember Z-Net 5.1.2 stack may now
connect to host PCs over a USB serial link.
---
drivers/usb/serial/cp210x.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c
index e4bb622..ce81fa8 100644
--- a/drivers/usb/serial/cp210x.c
+++ b/drivers/usb/serial/cp210x.c
@@ -154,6 +154,7 @@ static const struct usb_device_id id_table[] = {
{ USB_DEVICE(0x18EF, 0xE00F) }, /* ELV USB-I2C-Interface */
{ USB_DEVICE(0x1ADB, 0x0001) }, /* Schweitzer Engineering C662 Cable */
{ USB_DEVICE(0x1B1C, 0x1C00) }, /* Corsair USB Dongle */
+ { USB_DEVICE(0x1BA4, 0x0002) }, /* Silicon Labs 358x factory default */

Your whitespace is corrupted here, making the patch impossible to apply
:(
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-***@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html

Nathaniel Ting

2014-10-03 15:06:33 UTC

Permalink

--
1.9.1

Greg KH

2014-10-03 15:50:01 UTC

Permalink

Close, but if you ran your patch through checkpatch.pl you would see
that you used spaces instead of tabs for indentation.

At least the tabs on the other lines came through correctly, which is
good.

Care to fix this up and try again?

thanks,

greg k-h
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-***@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html

Nathaniel Ting

2014-10-03 16:01:20 UTC

Permalink

From: Nathaniel Ting <***@silabs.com>

Enable Silicon Labs Ember VID chips to enumerate with the cp210x usb serial
driver. EM358x devices operating with the Ember Z-Net 5.1.2 stack may now
connect to host PCs over a USB serial link.

Signed-off-by: Nathaniel Ting <***@silabs.com>
---
drivers/usb/serial/cp210x.c | 1 +
1 file changed, 1 insertion(+)

diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c
index e4bb622..ab1eb9b 100644
--- a/drivers/usb/serial/cp210x.c
+++ b/drivers/usb/serial/cp210x.c
@@ -154,6 +154,7 @@ static const struct usb_device_id id_table[] = {
{ USB_DEVICE(0x18EF, 0xE00F) }, /* ELV USB-I2C-Interface */
{ USB_DEVICE(0x1ADB, 0x0001) }, /* Schweitzer Engineering C662 Cable */
{ USB_DEVICE(0x1B1C, 0x1C00) }, /* Corsair USB Dongle */
+ { USB_DEVICE(0x1BA4, 0x0002) }, /* Silicon Labs 358x factory default */
{ USB_DEVICE(0x1BE3, 0x07A6) }, /* WAGO 750-923 USB Service Cable */
{ USB_DEVICE(0x1E29, 0x0102) }, /* Festo CPX-USB */
{ USB_DEVICE(0x1E29, 0x0501) }, /* Festo CMSP */

--
1.9.1

Greg KH

2014-10-03 17:14:42 UTC

Permalink

Post by Nathaniel Ting
Enable Silicon Labs Ember VID chips to enumerate with the cp210x usb serial
driver. EM358x devices operating with the Ember Z-Net 5.1.2 stack may now
connect to host PCs over a USB serial link.
---
drivers/usb/serial/cp210x.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c
index e4bb622..ab1eb9b 100644
--- a/drivers/usb/serial/cp210x.c
+++ b/drivers/usb/serial/cp210x.c
@@ -154,6 +154,7 @@ static const struct usb_device_id id_table[] = {
{ USB_DEVICE(0x18EF, 0xE00F) }, /* ELV USB-I2C-Interface */
{ USB_DEVICE(0x1ADB, 0x0001) }, /* Schweitzer Engineering C662 Cable */
{ USB_DEVICE(0x1B1C, 0x1C00) }, /* Corsair USB Dongle */
+ { USB_DEVICE(0x1BA4, 0x0002) }, /* Silicon Labs 358x factory default */
{ USB_DEVICE(0x1BE3, 0x07A6) }, /* WAGO 750-923 USB Service Cable */
{ USB_DEVICE(0x1E29, 0x0102) }, /* Festo CPX-USB */
{ USB_DEVICE(0x1E29, 0x0501) }, /* Festo CMSP */
--
1.9.1

Much better, thanks.

Johan will queue this up to his tree in a bit and will then send it on
to me.

thanks,

greg k-h
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-***@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html

Johan Hovold

2014-10-22 08:13:49 UTC

Permalink

Applied, thanks.

Johan

Post by Nathaniel Ting
---
drivers/usb/serial/cp210x.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c
index e4bb622..ab1eb9b 100644
--- a/drivers/usb/serial/cp210x.c
+++ b/drivers/usb/serial/cp210x.c
@@ -154,6 +154,7 @@ static const struct usb_device_id id_table[] = {
{ USB_DEVICE(0x18EF, 0xE00F) }, /* ELV USB-I2C-Interface */
{ USB_DEVICE(0x1ADB, 0x0001) }, /* Schweitzer Engineering C662 Cable */
{ USB_DEVICE(0x1B1C, 0x1C00) }, /* Corsair USB Dongle */
+ { USB_DEVICE(0x1BA4, 0x0002) }, /* Silicon Labs 358x factory default */
{ USB_DEVICE(0x1BE3, 0x07A6) }, /* WAGO 750-923 USB Service Cable */
{ USB_DEVICE(0x1E29, 0x0102) }, /* Festo CPX-USB */
{ USB_DEVICE(0x1E29, 0x0501) }, /* Festo CMSP */